DigitalCNC

Menu

Explore DigitalCNC

Try DigitalCNC →

info@digitalcnc.ai

Your questions, answered.

Explore DigitalCNC. Physics you can check: same program, same machine, same answer. Programmer approval: Adam proposes. You decide.

In two layers. Adam is an AI agent: it runs the analyses, interprets the results, explains them and proposes changes. Underneath, DigitalCNC’s core is deterministic and physics-based: the same program on the same machine always gives the same answer. Adam controls the core, but every prediction comes from the physics, and the programmer approves every change.

Each model is built from the machine’s controller archive file, which captures its kinematics, dynamic limits and controller settings. It is a drag-and-drop file.

Fanuc, Siemens, Heidenhain and Mazak controllers. Siemens NX, Mastercam and CATIA V5.

The two work together. Simulation confirms the toolpath is safe. DigitalCNC predicts how your specific machine will execute it: achieved feed, chip load, risk areas and cycle time.

No. Adam proposes changes. The programmer approves every change before it is written back to CAM, and every change is recorded.

No. DigitalCNC is installed on the user’s own computer and does not connect to your machines. Cyber Essentials Plus certified.

3-axis and 3+2 milling are available now. Simultaneous five-axis follows in November 2026 and turning in Q1 2027.

Try it online with no install at digitalcnc.ai/virtual-environment, or book a two-week proof of value on your own parts through info@digitalcnc.ai.

Prove it on your own parts in two weeks.

We benchmark your current process, prove out the improvements on your own parts and machines, and document every result, with the measures agreed at the start.